E-350 Dana axle M70FF (M267FF). 3.28 qt (3.1 L) 1. E-450 Dana axle M70HD (M273HD). 4.86 qt (4.6 L) 1. 1 Fill Dana rear axles to 0.24–0.55 in (6–14 mm) below the bottom of the fill hole. Materials. Name. Specification. Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant.
2018 Ford Focus Weight. The 2018 Ford Focus curb weight ranges from 2935 lbs. to 3640 lbs. depending on the trim. Curb Weight (Imp.) Curb Weight (Imp.) A 2017 Nitrous Blue Ford Focus RS 5 door Hatchback as seen in the Ford dealership's showroom. The RS is coupled to a 350 horsepower 2.3L EcoBoost® engine.
Ford Windstar (1994 – 2004) (USA) Model Engine Capacity/Filter Capacity Litres (liters) Oil Change Intervals Freestyle 3.0 V6 24V (2004 – 2008) Duratec 5.7 8 000 km Freestyle 3.0 V6 24V 4WD.
New York. May 11, 2021. #1. I have a 2016 Ford Focus 5sp 2.0L VCT naturally aspirated I just changed the oil on. While every source from manual to online shows the car takes just over 4.5 qts. I ended up putting in the entire 5 qt. jug of PUP to get it just below the full line on the dipstick. I also noticed the Ford dealer had written on the
The 2013 Ford Focus has an engine oil capacity of 4.5 quarts and a 2.0L 4-cylinder engine under the hood. Note that the 2.0L is the engine displacement —how much volume the engine’s cylinders take up—and is unrelated to the car’s engine oil capacity .
Don't forget to put the drain plug back in (20 ft/lbs per Ford shop manual - Oil pan drain plug/Part# 6730/ Torque 27 Nm (20 lb-ft)). Put 4 quarts of oil in, start the engine and check for leaks. Do this before lowering the car. 4 quarts will fill it enough to measure halfway between the two holes on the dipstick.
. 48 213 246 133 136 94 399 227 396
ford focus 2008 oil capacity
